The Sneakbox Decoy Company
Traditional Handmade Cork Duck Decoys
Eliot, Maine 207-439-5097 jim@sneakboxdecoy.com
Traditional Handmade Cork Duck Decoys
Eliot, Maine 207-439-5097 jim@sneakboxdecoy.com
About Our Cork Decoys
 |
| |
 |
| |
 |
| |
 |
| |
 |
Premium Grade Cork Decoys
Heads: Hand carved white cedar with taxidermy quality
glass eyes. Positions available are unlimited.
Body: Hand carved from high density, "tan" decoy cork.
Pine tail inserts.
Keel: Wide, pine or cedar keel, individually weighted after
assembly for proper attitude.
Fasteners: Galvanized and stainless steel screws.
Through keel up into head, and down through tail insert
and body into the keel.
Paint: Acrylic paints applied by hand brushing and air
brush. Significant detailing. The final paint job is sealed
with acrylic sealer and an oil based varnish is applied to
create a dead-flat finish.
Heads: Hand carved white cedar with taxidermy quality
glass eyes. Positions available are unlimited.
Body: Hand carved from high density, "tan" decoy cork.
Pine tail inserts.
Keel: Wide, pine or cedar keel, individually weighted after
assembly for proper attitude.
Fasteners: Galvanized and stainless steel screws.
Through keel up into head, and down through tail insert
and body into the keel.
Paint: Acrylic paints applied by hand brushing and air
brush. Significant detailing. The final paint job is sealed
with acrylic sealer and an oil based varnish is applied to
create a dead-flat finish.
This picture shows the
wooden keel and weight used
as ballast on a Premium Cork
Decoy. Each is floated and
weighted for correct floating
attitude before it is painted.
wooden keel and weight used
as ballast on a Premium Cork
Decoy. Each is floated and
weighted for correct floating
attitude before it is painted.
Copyright: The Sneakbox
Decoy Company, 2007
Decoy Company, 2007
Gunning Grade Decoys
Heads: Hand carved white cedar with taxidermy quality
glass eyes. Positions available are unlimited.
Body: Hand carved from high density, "tan" decoy cork.
Keel: One inch wide X one and one half inch deep pine or
cedar keel. Internally weighted before assembly.
Fasteners: Galvanized and stainless steel screws.
Through keel up into head, and down through the body
into the keel.
Paint: Acrylic paints applied by hand brushing and air
brush and there is some detail painting on the bill. Final
paint job of each decoy is sealed with acrylic sealer and an
oil based varnish is applies to create a dead-flat finish.
Heads: Hand carved white cedar with taxidermy quality
glass eyes. Positions available are unlimited.
Body: Hand carved from high density, "tan" decoy cork.
Keel: One inch wide X one and one half inch deep pine or
cedar keel. Internally weighted before assembly.
Fasteners: Galvanized and stainless steel screws.
Through keel up into head, and down through the body
into the keel.
Paint: Acrylic paints applied by hand brushing and air
brush and there is some detail painting on the bill. Final
paint job of each decoy is sealed with acrylic sealer and an
oil based varnish is applies to create a dead-flat finish.